PacDrive 3 Lexium 62 ILM

Lexium 62 ILM integrated drives use a flexible approach to cabling, consisting of pre-terminated hybrid cables and Lexium 62 ILM distribution boxes. The network itself is confgured as a plug-and-play solution. Compared to conventional servo solutions, this reduces the required cabling by up to 70% and the labour required for installing the servo solution in the machine frame is reduced by approximately 50%. Lexium 62 ILM integrated drives are the key element in modular machine design. They permit modular design of mechanics, software, and even electronics. This makes the Lexium 62 ILM integrated drive an ideal solution for machines with a variety of optional mechatronic modules. Except for additional power supply units that may be required, any later addition of modules to a machine requires no changes in the control cabinet.

Lexium 62 ILM integrated drive benefts

• Quick interconnects and hybrid cables for signal and power level
• Plug & Play technology
• Up to 90% less cabinet space
• Up to 90% less wiring time
• Up to 70% less cabling

Peak torques of 3.5 to 55 Nm (2.58 to 40.57 ft lbf) Lexium 62 ILM integrated drives are available in flange sizes of 70, 100, and 140 mm (2.76, 3.94, and 5.52 in.).  Thus they will fully cover a holding torque range of 1.1 to 12.5 Nm (0.81 to 9.22 ft lbf) and/or a peak torque of 3.5 to 55 Nm (2.58 to 40.57 ft lbf).  The models are software-compatible with one another and with Lexium 62 and Lexium 52 series servo drives. Additional options include an integrated holding brake, a feathered key groove, and a multi-turn encoder.  The addition of a shaft seal can increase the protection rating from IP54 to IP65.